Прошивка Furuno GP-150/DUAL

Пытаюсь обновить прошивку на версию 4.05

Загрузчик заливается ОК, стирает флэш, но сам файл прошивки не хочет

подтягивать. Постоянно вылезает ошибка «Format errored.»

В чем может быть проблема?

Лог прилагаю:

c:\gps150>uppg.exe rload.bin dual.bin 0 0 100 0 1 0
Program upload utility Version 14.00
Copyright(c) FURUNO ELECTRIC CO.,LTD. 1997-2006 (T.K) 2006-2007 (A.N)
2007-2008 (F.L) 2008-2009 (T.Y)
2011- (T.H)
uppg infile1 infile2 p1 p2 p3 p4 p5 p6 p7…
p1: Deletion waiting time.
p2: Waiting time to write.
p3: Password output interval.
p4: CPU ID number.
p5: Port number.(1,2…)[:Baudrate.]
p6: New wait time to write.
p7: Other options.
|- LD[t]/[r] : t/r:Loader sending wait time[ms]/records.
|- ES[s] : s :ROM erase sectors.
|- RTSCTL:[o] : o :SIO RTS controll option(set 0 to 3).
|- TF2[f] : f :target file2 which will be selected by «P1» command
|- CPURSTOFF : Not send «PFEC,cprst,id*hh<CR><LF>»
|- NOINFO : Not display UPPG’s Infomation.
|- NOCHECK_ROMTYPE: Not check flashROM type(top/bottom).
|- RTO[t] : t :Response timeout[ms].
|- CPURSTBPS[bps] : bps:Setting for reset command baudrate[bps].
|- LOADERBPS[bps] : bps:Setting for loader program baudrate[bps].
|- MANUAL_END : UPPG is not automatically terminate.

———Displays the current settings———
Erase Wait time : 0sec
Write Wait time : 0msec
Password output interval : 100msec
Port no. : 1
Baudrate : 9600bps
New wait time : 0msec
ROM erase sectors :
Loader sending wait time : 0msec/0records
RTS controll option : RTS_CONTROL_DISABLE
Response timeout : 0msec
Reset command baudrate : 9600bps
Loader program baudrate : 9600bps
Manual End Setting : OFF
———————————————
Step1:Open files ( loader, targetfile )
Step1:Completed.
Step2:Open COM port.
Step2:Completed.
Step3:Send CPU reset command.
Step3:Completed.
Step4:Check password.

>>>TARGET POWER ON<<<
Number of trials( Password ) : 27
Number of trials( Reopen port ) : 0
Step4:Completed.
Step5:Wait ‘G’ command.
Step5:Completed.
Step6:Send loader program.
Step6:Completed.
Step7:Select target file.
Target file 1 will be transfered
Step7:Completed.
Step8:Send target file.
setting time :0msec
bps :38400
bl :8
parity :78
stopbit :1
cont :NONE
>>Now Erasing
>>Writting……
>>Format errored.