- В этой теме 8 ответов, 2 участника, последнее обновление 7 лет, 11 месяцев назад сделано .
- Для ответа в этой теме необходимо авторизоваться.
Добрый день. Используется РЛС FURUNO DRS4D-NXT. В программе TIME ZERO происходит зеркальное отображение эхо-сигналов от объектов. Есть ли параметр через который можно это изменить? Радар установлен правильно, а работает как-будто перевернут на 180 градусов.
Евгений, добрый день!
А какой введен юстировочный угол?
Выравнивание курса антенны установлено на ноль. Если этот параметр менять то расположение объектов изменится, спасибо. Еще вопрос, курсовая черта всегда направлена но ноль градусов, как исправить чтобы направление соответствовало курсу судна?
У Вас датчик курса заведен на ПК с TZ Professional?
Ваш DRS4D-NXT должен получать данные о курсе с компьютера, если он подключен к нему напрямую, без дисплея (MFD или TZT серии NavNet).

DRS4D-NXT подключен на прямую к ПК, курс подается на com порт ПК с гирокомпаса SIMRAD GS80.

Посмотрите, чтобы источником курса для DRS был выбран ПК. Описание процедуры ниже

Если все выбрано верно, то лучше вызвать специалиста для настройки, так как удаленно понять в чем проблема трудно.
Проверьте еще ориентация РЛС какая у Вас выбрана, по курсу или по северу.
Спасибо за помощь, настроили все как надо, работает отлично.
Regarding Unauthorized Supply of FURUNO Equipment
LLC “EURUS”, being the official distributor, service and technical partner of FURUNO products within the member states of the Eurasian Economic Union (EAEU), including the Russian Federation, hereby formally notifies all foreign companies currently supplying or intending to supply FURUNO equipment into the above-mentioned territories outside the official distribution channel of the following.
Any supply of FURUNO equipment into EAEU member states without prior coordination and authorization through LLC “EURUS” shall be considered an unauthorized supply performed in violation of the manufacturer’s established distribution, service and technical support policy.
LLC “EURUS”, together with FURUNO and its authorized global service structure, continuously monitors and controls equipment supplied into the region, including but not limited to:
In the event unauthorized supply of FURUNO equipment into any EAEU member state is identified:
The above restrictions are permanent, non-reversible and shall remain applicable throughout the entire operational lifetime of the equipment, regardless of resale, transfer of ownership, vessel reflagging or change of operating region.
Furthermore, information regarding identified unauthorized supplies may be taken into consideration during interaction with classification societies, shipyards, shipowners, service organizations and other participants of the maritime industry.
LLC “EURUS” considers any unauthorized supply of FURUNO equipment into EAEU member states as actions creating direct technical, operational and reputational risks for end users, shipowners and the manufacturer.
In order to avoid the above consequences, all foreign suppliers, traders and intermediaries are strongly requested to coordinate any intended supply of FURUNO equipment into EAEU member states exclusively through LLC “EURUS”.